VIVOTEK
User's Manual - 105
■ Camera tampering detection
This option allows the Network Camera to trigger when the camera detects that is is being tampered
with. To enable this function, you need to congure the Tampering Detection option rst. Please refer
to page 120 for detailed information.
■ Manual Trigger
This option allows user to enable event triggers manually by clicking the on/off button on the
homepage. Please congure 1 ~ 3 events before using this function.
■ VADP
These checkboxes allow the events to be triggered by 3rd-party software modules known as VADP.
Users may implant these modules for different purposes such as triggering motion detection, or
applications related to video analysis, etc. Please refer to page 123 for the conguration options with
VADP modules.
■ Audio detection
A preset threshold can be congured with an external microphone as the trigger to system event. The
triggering condition can be an input exceeding or falling below a threshold. Audio detection can take
place as a complement to motion detection or as a method to detect activities not covered by the
camera's view.
Once you have a preset audio alarm level, you can dene the triggering condition either as an audio
input rises above or falls below the alarm level.
To Next Page
Loading...
Need help?
General
