Vivotek FE8180 - Page 136

VIVOTEK
136 - User's Manual
Value> default values except the custom
language file the user has uploaded.
This command can cooperate with
other “restoreexceptXYZ” commands.
When cooperating with others, the
system parameters will be restored to
the default value except for a union of
the combined results.
restoreexceptvadp <integer> N/A 99/6 Restore the system parameters to
default values except the vadp
parameters and VADP modules that
stored in the system.
This command can cooperate with
other “restoreexceptXYZ” commands.
When cooperating with others, the
system parameters will be restored to
the default value except for a union of
the combined results.
7.1.1 system.info
Subgroup of system: info (The fields in this group are unchangeable.)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
modelname string[40] FE8180 0/7 Internal model name of the server
(eg. IP7139)
extendedmodelname string[40] FE8180 0/7 ODM specific model name of server
(eg. DCS-5610). If it is not an ODM
model, this field will be equal to
“modelname”
serialnumber <mac
address>
<product
mac
address>
0/7 12 characters MAC address (without
hyphens).
firmwareversion string[40] <product
dependent
>
0/7 Firmware version, including model,
company, and version number in the
format: <MODEL-BRAND-VERSION>
language_count <integer> 9 0/7 Number of webpage languages
available on the server.
language_i<0~(count-1)> string[16] <product
dependent
0/7 Available language lists.