Vivotek FE8180 - IP Filter Configuration; Video Input Settings

VIVOTEK
User's Manual - 145
7.7 IP Filter
Group: ipfilter
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 6/6 Enable access list filtering.
admin_enable <boolean> 0 6/6 Enable administrator IP
address.
admin_ip String[43] <blank> 6/6 Administrator IP address.
maxconnection 0~10 10 6/6 Maximum number of
concurrent streaming
connection(s).
type 0, 1 1 6/6 Ipfilter policy :
0 => allow
1 => deny
ipv4list_i<0~9> Single address:
<ip address>
Network address:
<ip address /
network mask>
Range
address:<start ip
address - end ip
address>
<blank> 6/6 IPv4 address list.
ipv6list_i<0~9> String[43] <blank> 6/6 IPv6 address list.
7.8 Video input
Group: videoin
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
cmosfreq 50, 60 60 4/4 CMOS frequency.
(capability.videoin.type=2)
whitebalance auto, manual,
rbgain
auto 4/4 “auto” indicates auto white balance.
“manual” indicates keep current
value.
exposurelevel 0~12 6 4/4 Exposure level
enableblc <boolean> 0 4/4 Enable backlight compensation.