Vivotek FE8180 - Page 154

VIVOTEK
154 - User's Manual
profile_i0_enable <boolean> 0 4/4 Enable/disable this profile
setting
profile_i0_policy schedule schedule 4/4 The mode which the profile is
applied to.
profile_i0_begintime hh:mm 18:00 4/4 Begin time of schedule mode.
profile_i0_endtime hh:mm 06:00 4/4 End time of schedule mode.
profile_i0_brightness -5~5 -5 4/4 Adjust brightness of image
according to mode settings.
profile_i0_saturation -5~5,100 0 4/4 Adjust saturation of image
according to mode settings.
100 for saturation percentage
mode.
profile_i0_saturationpercent 0~100 50 4/4 Adjust saturation value of
percentage when
saturation=100
profile_i0_contrast -5 ~ 5 0 4/4 Adjust contrast of image
according to mode settings.
profile_i0_sharpness -3~3, 100 0 4/4 Adjust sharpness of image
according to mode settings.
profile_i0_sharpnesspercent 0~100 50 4/4 Adjust sharpness value of
percentage when
sharpness=100
profile_i0_gammacurve 0~100 0 4/4 Gamma curve
profile_i0_lowlightmode <boolean> 1 4/4 Enable/disable low light mode.
profile_i0_wdrcstrength 0~2 1 4/4 WDR enhanced
0: low
1: medium
2: high
profile_i0_wdrcmode 0~2 0 4/4 WDR enhanced
0: off
1: Sensitivity low
2: Sensitivity high
profile_i0_dnr_mode 0~1 0 4/4 Enable/disable noise reduction
profile_i0_dnr_strength 1~100 50 4/4 The strength of noise reduction.
1~33: low
34~67: medium
68~100: high