Vivotek FE8180 - HTTPS Settings Configuration

VIVOTEK
User's Manual - 183
adaptive_preevent
<product dependent>
0~9 1 6/6 Indicate when is the adaptive recording
started before the event trigger point
(seconds)
adaptive_postevent
<product dependent>
0~10 1 6/6 Indicate when is the adaptive recording
stopped after the event trigger point
(seconds)
7.34
Group: https (capability.protocol.https > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 6/6 To enable or disable secure HTTP.
policy <Boolean> 0 6/6 If the value is 1, it will force HTTP
connection redirect to HTTPS
connection
method auto,
manual,
install
auto 6/6 auto => Create self-signed
certificate automatically.
manual => Create self-signed
certificate manually.
install => Create certificate
request and install.
status -3 ~ 1 0 6/6 Specify the https status.
-3 = Certificate not installed
-2 = Invalid public key
-1 = Waiting for certificate
0 = Not installed
1 = Active
countryname string[2] TW 6/6 Country name in the certificate
information.
stateorprovincename string[128] Asia 6/6 State or province name in the
certificate information.
localityname string[128] Asia 6/6 The locality name in the certificate
information.
organizationname string[64] Vivotek Inc. 6/6 Organization name in the
certificate information.
unit string[64] Vivotek Inc. 6/6 Organizational unit name in the
certificate information.
commonname string[64] www.vivotek. 6/6 Common name in the certificate