Vivotek GFV24CB2 User Manual

18
DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC REL ATED INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modications to this equipment. Such modications could void the
user’s authority to operate the equipment.

Vivotek GFV24CB2 Specifications

General

Model Number	GFV24CB2
LED Indicator	Power on: Blue (solid); Power saving: Red (solid)
Screen Size	23.8’’
Viewing Angle	178° (H) / 178° (V)
Aspect Ratio	16:9
Resolution	1920x1080p
Refresh Rate	180Hz
Brightness	Typical: 250 cd/m2
Default Color Temperature	6500
Color Gamut	95% sRGB; 85% NTSC
Pixel Pitch	0.0915 x 0.2745 mm
Display Colors	16.7M
Response Time	6ms (OD)/MPRT 1ms
Ports	DP1.2 x 1, HDMI 1.4 x 1, Audio output x 1
Adapter	DC 12V 2.5 A
Power Consumption	Typical: 24W; Max: 34W; Standby ≤ 0.5W
OSD Language*	English, 简体中文，Nederlands, Français, Deutsch 한국，Español, Русский, Português, Turkce, Italiano, Polski, 日本語
Usage Temp.	32°F~104°F (Operating), -4°F~ 140°F (Storage), 10- 85% RH (Non-Condensing)

Weight and Dimensions

Tilt Angle	Forward 5°; Backward 15° (±2°)
VESA Mounting	75 x 75 mm
Dimensions (with stand)	21.3 x 15.9 x 6.3 in (542.4 x 402.8 x 160.9mm)
Weight (with stand)	7.05 lb. / 9.92 lb. (with packaging)