Vivotek IB8360-W User Manual

VIVOTEK
10 - User's Manual
NOTE:
1. WPS may not work if your AP is congured with a "hidden" SSID.
2. If no WPS-enabled AP is detected, the camera will repeat trying to connect by every 20
seconds. If the camera still can not detect an AP after 2 minutes, the wireless setup will
be cancelled.
3.If a camera is assigned with a fiex IP outside the AP's network segment, wireless
conguration will fail.
VIVOTEK (1C:CC)
AP mode
B-1
B: WiFi w/o WPS
Network Camera
Model No: XXXXXX
MAC: 0002D14BAD55
Pat. 6,930,709
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Made in Taiwan
4B:AD:55
MAC
Client mode
B-1. When your device has wireless connectivity, e.g., a notebook. Use it to connect
search and connect the camera. The camera comes using the AP mode as the default.
B-2. Search your wireless network. You should be able to nd the camera displayed as
"VVTK and the last 3 octets of the MAC address."
1
2
3
AP

Vivotek IB8360-W Specifications

General

Brand	Vivotek
Model	IB8360-W
Category	Security Camera
Language	English