Vivotek IP8130 - Page 143

VIVOTEK
User's Manual - 143
URL Command Document for All SeriesIP8130/31
28
s<0~(m-1)>_h264_
ratecontrolmode
cbr, vbr cbr 4/4 cbr, constant bitrate
vbr, fix quality
s<0~(m-1)>_h264_
quant
1~5,99,100 3 4/4 Quality of video when choosing vbr in
“ratecontrolmode”.
99,100 is the customized manual input
setting.
1 = worst quality, 5 = best quality.
s<0~(m-1)>_h264_
qpercent
1~100 45 4/4 Set quality by percentage.
1: Worst quality
100: Best quality
(s<0~(m-1)>_h264_quant = 100)
s<0~(m-1)>_h264_
qvalue
0~51 26 4/4 Manual video quality level input.
(s<0~(m-1)>_h264_quant = 99)
s<0~(m-1)>_h264_
bitrate
1000~8000000 3000000 4/4 Set bit rate in bps when choosing cbr
in “ratecontrolmode”.
s<0~(m-1)>_h264_
maxframe
1~25,
26~30 (only
for NTSC or
60Hz CMOS)
30 1/4 Set maximum frame rate in fps (for
h264).
s<0~(m-1)>_h264_
profile
0~2 1 1/4 Indicate H264 profiles
0: baseline
1: main profile
2: high profile
s<0~(m-1)>_mjpeg
_quant
1~5,99,100 3 4/4 Quality of JPEG video.
99, 100 is the customized manual
input setting.
1 = worst quality, 5 = best quality.
s<0~(m-1)>_mjpeg
_maxframe
1~25,
26~30 (only
for NTSC or
60Hz CMOS)
30 1/4 Set maximum frame rate in fps (for
JPEG).
s<0~(m-1)>_mjpeg
_qvalue
10~200 50 4/4 Manual video quality level input.
(s<0~(m-1)>_mjpeg_quant = 0)
s<0~(m-1)>_mjpeg
_qpercent
1~100 49 4/4 Set quality by percentage.
1: Worst quality
100: Best quality
(s<0~(m-1)>_mjpeg_quant = 100)
s<0~(m-1)>_forcei 1 N/A 7/6 Force I frame.