Need help?Do you have a question about the Vivotek IZ9361-EH and is the answer not in the manual?
General| Sensor Type | 1/2.8" Progressive CMOS |
|---|---|
| Video Compression | H.265, H.264, MJPEG |
| Ingress Protection | IP66 |
| Vandal Resistance | IK10 |
| Audio | Two-way audio |
| Resolution | 1920x1080 |
| Lens Type | Varifocal |
| Aperture | F1.4 |
| Minimum Illumination | 0.05 Lux |
| Day/Night | Yes |
| IR Range | Up to 30m |
| WDR Technology | True WDR |
| Frame Rate | 30 fps at 1920x1080 |
| Network Interface | 10/100 Base-T Ethernet |
| Power Supply | 12V DC, PoE |
| Operating Temperature | -30°C ~ 50°C (-22°F ~ 122°F) |
Jot down the camera's MAC address for later reference.
Drill holes for mounting screws and cabling based on the alignment sticker.
Install and use the IW2 utility to set up the network camera on the LAN.
Describes how to reset or restore the camera to factory default settings using the reset button.
Illustrates and explains how to connect the camera to the internet through a router.
Details the procedure for setting up a static IP address for the network camera.
Explains how to access the camera using web browsers, including plug-in installation.
Controls for video streams, manual triggers, digital output, and PTZ.
Shows the live video feed with title, time, and control buttons.
Allows upgrading the network camera's firmware by uploading a .pkg file.
Restores the network camera to factory default settings, with options to retain configurations.
Configures exposure measurement window, level, mode, time, gain for normal and special situations.
Sets exposure mode (Auto, Shutter, Iris, Manual) and controls.
Allows blocking sensitive zones by configuring privacy mask windows on the screen.
Configures video stream settings, including frame size, frame rate, and intra frame period.
Selects the network type, defaulting to LAN, and explains automatic vs. fixed IP addresses.
Explains HTTP authentication, ports, and access names for video streams.
Details RTSP streaming authentication, ports, and access names for video streams.
Explains RTSP authentication modes (disable, basic, digest) and their availability.
Details default and custom port settings for RTSP, RTP, and RTCP.
Sets the administrator password for the permanent 'root' account.
Creates, modifies, or deletes user accounts with different privilege levels.
Explains how to enable authentication and encrypted communication using SSL certificates.
Controls access permission by verifying client PC's IP address and managing concurrent streams.
Enables access list filtering by selecting 'Allow' or 'Deny' filter types for IP addresses.
Guides on enabling 802.1x port-based network access control with EAP methods.
Configures RS485 settings for connecting and controlling mechanical PTZ drivers or scanners.
Sets up events with reactive measures like recording or snapshots based on triggers.
Defines trigger sources like video motion detection, periodically, or digital input.
Defines actions like triggering digital output or backing up media if the network disconnects.
Configures motion detection windows, sensitivity, and item size.
Configures audio detection settings, including alarm level and enabling the feature.
Configures adaptive recording, source, schedule, and capacity for video recording.
Sets search criteria for recorded data and views the search results.
Specifies the external HTTP-based API for requesting images and controlling camera functions.
To Next Page
