Vivotek MD7560 User Manual

VIVOTEK
User's Manual - 111
New Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
daylight_enable <boolean> 6/6 Enable automatic daylight saving time in
time zone.
daylight_dstactual
mode
<boolean> 6/7 Check if current time is under daylight
saving time.
(Used internally)
daylight_auto_begi
ntime
string[19] 6/7 Display the current daylight saving start
time.
daylight_auto_endti
me
string[19] 6/7 Display the current daylight saving end
time.
daylight_timezones string 6/6 List time zone index which support daylight
saving time.
updateinterval 0,
3600,
86400,
604800,
2592000
6/6 0 to Disable automatic time adjustment,
otherwise, it indicates the seconds between
NTP automatic update intervals.
restore 0,
<positive integer>
7/6 Restore the system parameters to default
values after <value> seconds.
reset 0,
<positive integer>
7/6 Restart the server after <value> seconds if
<value> is non-negative.
restoreexceptnet <Any value> 7/6 Restore the system parameters to default
values except (ipaddress, subnet, router,
dns1, dns2, pppoe).
This command can cooperate with other
“restoreexceptXYZ” commands. When
cooperating with others, the system
parameters will be restored to the default
value except for a union of the combined
results.
restoreexceptdst <Any value> 7/6 Restore the system parameters to default
values except all daylight saving time
settings.
This command can cooperate with other
“restoreexceptXYZ” commands. When
cooperating with others, the system
parameters will be restored to default values

Vivotek MD7560 Specifications

General

Brand	Vivotek
Model	MD7560
Category	Security Camera
Language	English