VIVOTEK
User's Manual - 67
Camera Control
Note: This function in only for MD7560/7560D (megapixel model).
This section explains how to control the Network Camera’s e-Pan/Tilt/Zoom operation. It allows
users to quickly move the focus to a target area for close-up viewing without moving the camera
physically�
Select Stream: Select one of the stream 1~3 to set up the e-PTZ control� Please note that each stream
can be set up with its own e-preset positions and e-patrol settings� For detailed information about
how to set up E-Preset Positions and E-Patrol Settings, please refer to page 72~74�
Zoom Times Display
If you check this item, the zoom indicator will be displayed on the home page when you zoom in/out the
live viewing window as the picture shown on the next page.
When completed with the settings of e-PTZ, click Save to enable the settings on this page�
2010/05/19 11:46:50
To Next Page
Loading...
Need help?
General
