Vivotek MD7560 User Manual

VIVOTEK
68 - User's Manual
E-Preset Positions
A total of 20 preset positions can be congured. You can select preset positions for the camera to patrol.
Please follow the steps below to preset a position:
1� Adjust the shooting area to the desired position using the buttons on the right side of the window�
2� Enter a name for the preset position, which allows for up to forty characters� Click Add to enable the
settings� The preset positions will be displayed under the Preset Location list on the left-hand side�
3� To add additional preset positions, please repeat steps 1~2�
4� To remove a preset position from the list, select it from the drop-down list and click Delete�
5� The e-preset positions will also displayed on the main page� Please refer to the illustration on page 70�
6� Click Save to enable the settings�
2010/05/26 11:46:50
Functions are the same
as the Control Panel on
the home page
1
2
4
6
2

Vivotek MD7560 Specifications

General

Brand	Vivotek
Model	MD7560
Category	Security Camera
Language	English