Vivotek MD7560 User Manual

VIVOTEK
132 - User's Manual
nanystream 0,
<positive integer>
0/7 number of any media stream per channel
tampering <boolean> 0/7 Indicate whether to support tampering detection.
temperature <boolean> 0/7 Indicate whether to support temperature
detection.
5.23. Customized event script
Group: event_customtaskfile_i<0~2>
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
name string[41] 6/7 Custom script identification of this entry.
date string[17] 6/7 Date of custom script.
time string[17] 6/7 Time of custom script.
5.24. Event setting
Group: event_i<0~2>
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
name string[40] 6/6 Identification of this entry.
enable 0, 1 6/6 Enable or disable this event.
priority 0, 1, 2 6/6 Indicate the priority of this event:
“0” = low priority
“1” = normal priority
“2” = high priority
delay 1~999 6/6 Delay in seconds before detecting the next event.
trigger boot,
di,
motion,
seq,
recnotify,
tampering,
temperature,
vi
6/6 Indicate the trigger condition:
“boot” = System boot
“di”= Digital input
“motion” = Video motion detection
“seq” = Periodic condition
“recnotify” = Recording notification.
“tampering” = Tamper detection.
”temperature” = Temperature detection
“vi”= Virtual input (Manual trigger)
triggerstatus String[40] 6/6 The status for event trigger

Vivotek MD7560 Specifications

General

Brand	Vivotek
Model	MD7560
Category	Security Camera
Language	English