Vivotek MD7560 User Manual

VIVOTEK
130 - User's Manual
0(fields are valid),
1(fields are invalid)
eptz 0,
<positive integer>
0/7 A 32-bit integer, each bit can be set separately
as follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
npreset 0, <positive
integer>
0/7 Number of preset locations.
protocol_https < boolean > 0/7 Indicate whether to support HTTP over SSL.
protocol_rtsp < boolean > 0/7 Indicate whether to support RTSP.
protocol_sip <boolean> 0/7 Indicate whether to support SIP.
protocol_maxconne
ction
<positive integer> 0/7 The maximum allowed simultaneous
connections.
protocol_maxgenco
nnection
<positive integer> 0/7 The maximum general streaming connections .
protocol_rtp_multic
ast_scalable
<boolean> 0/7 Indicate whether to support scalable multicast.
protocol_rtp_multic
ast_backchannel
<boolean> 0/7 Indicate whether to support backchannel
multicast.
protocol_rtp_tcp <boolean> 0/7 Indicate whether to support RTP over TCP.
protocol_rtp_http <boolean> 0/7 Indicate whether to support RTP over HTTP.
protocol_spush_mj
peg
<boolean> 0/7 Indicate whether to support server push MJPEG.
protocol_snmp <boolean> 0/7 Indicate whether to support SNMP.
protocol_ipv6 <boolean> 0/7 Indicate whether to support IPv6.
protocol_pppoe <boolean> 0/7 Indicate whether to support PPPoE.
protocol_ieee8021x <boolean> 0/7 Indicate whether to support IEEE802.1x.
protocol_qos_cos <boolean> 0/7 Indicate whether to support CoS.
protocol_qos_dscp <boolean> 0/7 Indicate whether to support QoS/DSCP.
protocol_ddns <boolean> 0/7 Indicate whether to support DDNS.
videoin_type 0, 1, 2 0/7 0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
videoin_resolution <a list of available
resolution
separated by
commas>
0/7 Available resolutions list.

Vivotek MD7560 Specifications

General

Brand	Vivotek
Model	MD7560
Category	Security Camera
Language	English