EN - 9
English
For further setup, please refer to the user's manual on the software CD.
Ready to Use
6
To adjust the viewing angle
90°
1
2
Adjusting the Lens
7
Loosen the screws (not removing
them) on the sides of lens module.
Adjust the lens to a desired viewing
angle as shown on the right.
When done, fasten the screws so that
lens orientation can be xed
and withstand shock and
vibration.
1. A browser session with the Network Camera should prompt as shown below.
2. You should be able to see live video from your camera. You may also install the 32-channel
recording software from the software CD in a deployment consisting of multiple cameras.
For its installation details, please refer to its related documents.
To Next Page
Loading...
