Vivotek MD8562 - Page 113

VIVOTEK
User's Manual - 113
daylight_enable <boolean> 0 6/6 Enable automatic daylight
saving time in time zone.
daylight_dstactualmode <boolean> 1 6/7 Check if current time is under
daylight saving time.
(Used internally)
daylight_auto_begintime string[19] NONE 6/7 Display the current daylight
saving start time.
daylight_auto_endtime string[19] NONE 6/7 Display the current daylight
saving end time.
daylight_timezones string ,-360,-320,
-280,-240,
-241,-200,
-201,-160,
-140,-120,
-80,-40,0,
40,41,80,
81,82,83,
120,140,
380,400,48
0
6/6 List time zone index which
support daylight saving time.
updateinterval 0,
3600,
86400,
604800,
2592000
0 6/6 0 to Disable automatic time
adjustment, otherwise, it
indicates the seconds
between NTP automatic
update intervals.
restore 0,
<positive
integer>
N/A 7/6 Restore the system
parameters to default values
after <value> seconds.
reset 0,
<positive
integer>
N/A 7/6 Restart the server after
<value> seconds if <value>
is non-negative.
restoreexceptnet <Any
value>
N/A 7/6 Restore the system
parameters to default values
except (ipaddress, subnet,
router, dns1, dns2, pppoe).
This command can cooperate
with other
“restoreexceptXYZ”
commands. When
cooperating with others, the