Vivotek MD8562 - System

VIVOTEK
26 - User's Manual
Advanced Mode
Each function on the conguration list will be explained in the following sections. Those functions that are
displayed only in Advanced Mode are marked with
Advanced Mode
. If you want to set up advanced
functions, please click on [Advanced Mode] at the bottom of the conguration panel to quickly switch
over.
System
This section explains how to congure the basic settings for the Network Camera, such as the
host name and system time. It is composed of the following two columns: System and System
Time. When finished with the settings on this page, click Save at the bottom of the page to
enable the settings.
System
Host name: Enter a desired name for the Network Camera. The text will be displayed at the top of the
main page.
Configuration List
Firmware Version
Click to switch to Basic Mode