Vivotek MD8562 - Page 117

VIVOTEK
User's Manual - 117
(capability.ndo > 0)
privilege_camctrl
<product dependent>
view, operator,
admin
view 6/6 Indicate which privileges
and above can control PTZ
(capability.ptzenabled > 0
or capability.eptz > 0)
user_i0_name string[64] root 6/7 User name of root
user_i<1~20>_name string[64] <blank> 6/7 User name
user_i0_pass password[64] <blank> 6/6 Root password
user_i<1~20>_pass password[64] <blank> 7/6 User password
user_i0_privilege viewer,
operator,
admin
admin 6/7 Root privilege
user_i<1~20>_ privilege viewer,
operator,
admin
<blank> 6/6 User privilege
7.6 network
Group: network
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
preproces
s
<positive
integer>
<blank> 7/6 An 32-bit integer, each bit can be set separately as
follows:
Bit 0 => HTTP service;
Bit 1=> HTTPS service;
Bit 2=> FTP service;
Bit 3 => Two way audio and RTSP Streaming
service;
To stop service before changing its port settings.
It’s recommended to set this parameter when
change a service port to the port occupied by
another service currently. Otherwise, the service
may fail.
Stopped service will auto-start after changing port
settings.
Ex:
Change HTTP port from 80 to 5556, and change
RTP port for video from 5556 to 20480.
Then, set preprocess=9 to stop both service first.