Vivotek MD8562 - Page 127

VIVOTEK
User's Manual - 127
bgain 0~100 30 4/4 Manual set bgain value of
gain control setting.
exposurelevel 0~12 6 4/4 Exposure level
autoiris 0~1 0 4/4 set 1 to enable auto iris, set
0 to disable auto iris.
(not used in MD8562)
enablewdr <boolean> 0 4/4 Enable/disable wield
dynamic range. (not used in
MD8562)
enableblc 0~1 0 4/4 Enable backlight
compensation
agc 0,1,2 1 4/4 Set auto gain control to
normal level or MAX level.
0->2x,
1->4x,
2->8x
(not used in MD8562)
agcmode auto,fixed 1 4/4 Set auto gain control mode.
maxgain 0~100 100 4/4 Manual set maximum gain
value.
mingain 0~100 0 4/4 Manual set minimum gain
value.
color 0, 1 1 4/4 0 =>monochrome
1 => color
flip <boolean> 0 4/4 Flip the image.
mirror <boolean> 0 4/4 Mirror the image.
ptzstatus <integer> 0 1/7 A 32-bit integer, each bit can
be set separately as follows:
Bit 0 => Support camera
control function; 0(not
support), 1(support)
Bit 1 => Built-in or
external camera; 0
(external), 1(built-in)
Bit 2 => Support pan
operation; 0(not support),
1(support)
Bit 3 => Support tilt
operation; 0(not support),
1(support)