Vivotek MD8562 - Tampering Detection and Manual Trigger; Action Definition for Event Triggers

VIVOTEK
User's Manual - 81
■ Camera tampering detection
This option allows the Network Camera to trigger when the camera detects that is is being tampered
with. To enable this function, you need to congure the Tampering Detection option rst. Please refer
to page 102 for detailed information.
■ Manual Trigger
This option allows user to enable event triggers manually by clicking the on/off button on the
homepage. Please congure 1 ~ 3 events before using this function.
3. Action
Dene the actions to be performed by the Network Camera when a trigger
is activated.
■ Backup media if the network is disconnected
Select this option to backup media le on SD card if the network is disconnected. Please note that
this function will only apply after you set up the means to distribute recorded media to receivers on the
network (to Network Attached Storage or via Email, FTP, or HTTP). For more information about how to
set up network storage, please refer to page 105.