Vivotek MD8562 - Page 91

VIVOTEK
User's Manual - 91
When the Event Status is ON, once an event is triggered by motion detection, the Network Camera will
automatically send snapshots via e-mail.
If you want to stop the event trigger, you can click ON to turn it to OFF status or click the Delete button to
remove a previously-congured event setting.
To remove a server setting from the list, select a server name and click Delete. Note that you cannot
remove a server setting when it is applied in an event setting.
To remove a media setting from the list, select a media name and click Delete. Note that you cannot
remove a media setting when it is applied in an event setting.
Customized Script
This function allows you to upload a sample script (.xml le) to the webpage, which will save your time on
conguring the settings. Please note that there is a limited number of customized scripts you can upload;
if the current amount of customized scripts has reached the limit, an alert message will prompt. If you
need more information, please contact VIVOTEK’s technical support.
Click to upload a le
Click to modify the
script online