VIVOTEK
168 - User's Manual
URL Command Document for All Series391
33
bgain 0~100 21 4/4 Manual set bgain value of
gain control setting.
sensormode panorama,
region,
panorama 4/4 “panorama” indicates that
camera would try to balance
the image effect of every
sensor.
“region” indicates that the
image effect of every sensor
is independent to each other.
Note: Only available when
capability_videoin_c0_nsensor
> 1.
7.9 IR cut control
Group: ircutcontrol
NAME VA L U E DEFAULT SECURITY
(get/set)
DESCRIPTION
mode auto,
day,
night,
di,
schedule
auto 6/6 Set IR cut control mode
sir <boolean> 0 6/6 Enable/disable Smart IR
daymodebegintime 00:00~23:59 07:00 6/6 Day mode begin time
daymodeendtime 00:00~23:59 18:00 6/6 Day mod end time
disableirled <boolean> 0 6/6 Enable/disable built-in IR led
bwmode <boolean> 1 6/6 Switch to B/W in night mode if
enabled
sensitivity low,
normal,
high
normal 6/6 Sensitivity of light sensor
To Next Page
Loading...
