Vivotek VS8801 - Page 137

VIVOTEK
User's Manual - 137
38
URL Command Document for VS8401-VVTK
win_i<0~2>_sensitivity 0 ~ 100 0 4/4 Sensitivity of motion detection
window.
7.13 Tempering detection settings
Group: tampering_c<0~(n-1)> for n channel product (capability.tampering > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 4/4 Enable or disable tamper detection.
threshold 0 ~ 255 32 1/99 Threshold of tamper detection.
duration 10 ~ 600 10 4/4 If tampering value exceeds the ‘threshold’ for
more than ‘duration’ second(s), then tamper
detection is triggered.
7.14 DDNS
Group: ddns (capability.ddns > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 6/6 Enable or disable the dynamic DNS.
provider Safe100,
DyndnsDynamic,
DyndnsCustom,
TZO,
DHS,
DynInterfree,
CustomSafe100
DyndnsDy
namic
6/6 Safe100 => safe100.net
DyndnsDynamic => dyndns.org
(dynamic)
DyndnsCustom => dyndns.org
(custom)
TZO => tzo.com
DHS => dhs.org
DynInterfree =>dyn-interfree.it
CustomSafe100 =>
Custom server using safe100 method
<provider>_h
ostname
string[128] <blank> 6/6 Your DDNS hostname.
<provider>_use
rnameemail
string[64] <blank> 6/6 Your user name or email to login to
the DDNS service provider
<provider>_pas
swordkey
string[64] <blank> 6/6 Your password or key to login to the
DDNS service provider.
<provider>_ser
vername
string[128]
<blank> 6/6 The server name for safe100.
(This field only exists if the provider
is customsafe100)