Vivotek VS8801 - Page 138

VIVOTEK
138 - User's Manual
39
URL Command Document for VS8401-VVTK
7.15 UPnP presentation
Group: upnppresentation
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 1 6/6 Enable or disable the UPnP
presentation service.
7.16 UPnP port forwarding
Group: upnpportforwarding
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 6/6 Enable or disable the UPnP port
forwarding service.
upnpnatstatus 0~3 0 6/7 The status of UPnP port forwarding,
used internally.
0 = OK, 1 = FAIL, 2 = no IGD
router, 3 = no need for port
forwarding
7.17 Express link
Group:expresslink
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
state onlycheck,
onlyoffline,
checkonline,
badnetwork
<blank> 6/6 “onlycheck” : You have to input the
host name of your camera and press
"Register" button to register it.
“onlyoffline” : Express link is
active, you can now connect to this
camera at expresslink_url.
“checkonline” : Express link is not
active.
“badnetwork” : Express Link is not
supported under this network
environment.
url string[64] <blank> 6/6 The URL to connect to this camera