44
A. Chart Mode
B. Const. (Constellation) Lines
AltAz RADC
Constellation Lines ON Constellation Lines OFF
For various system settings, press the
Menu
key to access them. The
Menu
key is available in both
CHART MODE and SCOPE MODE .
Chart Setting
APPLICATION
Press the
Menu
key to display the System Menu
on the screen.
Choose Chart Setting with the
keys and press the
Select
key to enter.
The Chart Setting screen is displayed. Move the
cursor with the keys and select
your setting preference with the
Value
+ ,
Value
-
keys. Choose OK and press the
Select
key to
enter.
Choose
AltAz
in order to display the sky on
screen as it appears normally to the observer.
The horizon is displayed in this mode only.
The default setting is AltAz.
Choose
RADC
in order to display a borderless
star chart on the screen with no horizon. The
chart is oriented equatorially and scrolls in Right
Ascension and Declination.
Choose ON in order to show constellation
figure lines, and choose OFF to display charts
with no lines.
The default setting is ON.
To Next Page
Loading...
Need help?
General
