5
23
To enable/disable the Ramp Test Pattern:
1. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the Ramp Test Pattern menu is displayed.
2. Use the Arrow buttons on the remote to highlight Off. Use the
Left/Right Arrow buttons to highlight On to enable the Ramp
Test Pattern.
To disable the Ramp Test Patter, use the Left/Right Arrow
buttons to highlight Off.
3. When you are finished, press the EXIT button.
Ramp Test Pattern
Off
Renaming the Custom Picture Mode
You can rename the custom picture mode from the PICTURE
menu.
To rename the custom picture mode:
1. From the PROFESSIONAL
PICTURE menu, use the Arrow
buttons to highlight Rename
Picture Mode, and then press
OK. The RENAME PICTURE MODE
menu is displayed.
2. Use the Arrow buttons to enter
a custom name using the
on-screen keyboard.
3. Highlight Save and press OK.
4. Press the EXIT button to exit the
menu screens.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
