Vizio E320VT - Adjusting TV Settings; Channel Management

5
10
From the TV Settings Menu, you can:
• Setupchannels
• Changetheinputsource
• Changetheon-screenmenu
language
• ChangetheTV’sdateandtime
• AdjusttheTVsettingsforuseasa
PCmonitor
• EnableordisabletheCECsettings
Setting Up Channels
From the channel menu you can:
• Changethesignalsource
• Customizethemasterchannellist
• Scanfornew/additionalchannels
• Startanewchannelscan
• Customizechannelnames
Changing the Signal Source
Using this option, you can change the signal source for the coaxial (TV) input.
To change the signal source:
1. Press the MENU button on the remote.
The on-screen menu is displayed.
2. Use the Arrow buttons on the remote
to highlight the TV icon and press OK.
The TV Settings menu is displayed.
3. Use the Arrow buttons to highlight
Channels and press OK.
4. Use the Arrow buttons to highlight
Signal Source.
5. Use the Arrow buttons to change the
setting to Cable or Antenna.
6. Press EXIT.
Adjusting the TV Settings