16
5
E320VT/E370VT/E420VT
Setting the Date and Time
Using this menu option, you can manually set the TV’s date and time.
To manually set the date and time:
1. Press the MENU button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight the TV icon and press
OK. The TV Settings menu is displayed.
3. Use the Arrow buttons to highlight Date & Time and press OK.
4. Use the Arrow buttons to highlight Current Tiime.
5. Use the Arrow buttons to highlight individual numbers in the date and time.
Use the Number Pad to enter the current date and time.
6. Press EXIT.
Adjusting the TV Settings for Use with A PC
Your TV can be used to display output from a home computer using the RGB port.
These settings are only available when viewing content from the
RGB port. Your TV must be set to the RGB input.
To adjust the PC settings:
1. Press the MENU button on the remote.
The on-screen menu is displayed.
2. Use the Arrow buttons on the remote
to highlight the TV icon and press OK.
The TV Settings menu is displayed.
3. Use the Arrow buttons to highlight PC
Setting and press OK.
4. Use the Arrow and OK buttons to
adjust each of the following options:
Horiz. Position - Adjust the horizontal
(left/right) position of the picture.
Vertical Position - Adjust the vertical
(up/down) position of the picture.
Fine Tune - Adjust the synchronization
between the PC and the TV. Increase
or decrease this setting if you see
“waviness” or a blurry picture.
If you would like the TV to automatically adjust the picture for best
quality, select Auto Sync and press OK.
To Next Page
Loading...
Need help?
General
