Vizio E50-D1 User Manual

3
43
To access the color calibration settings menu:
1. From the Picture menu, tap Color
Calibration. The Color Calibration
menu is displayed.
• Color Tuner settings allow you to adjust the HSB color and 11 point

• Calibration Tests allow you to display SMPTE, Flat, Ramp, and
Uniformity Analyzer test patterns.
Adjusting the Color Calibration Settings

gain, and 11 point white balance. You can also reset the color tuner values and
perform calibration tests.
Current Picture Mode
Current Color Temperature
Adjusting the Color Tuner Settings
To adjust the color tuner:
1. From the Color Calibration
menu, tap Color Tuner. The
Color Tuner menu is displayed.
2. Tap Color Tuner, the Color Tuner
submenu is displayed.
3. Adjust settings with switches by
swiping left to disable and right
to enable. Adjust settings with

decrease and right to increase.
To adjust the 11 point white balance:
1. From the Color Tuner menu, tap
11 Point White Balance. The
11 Point White Balance menu is
displayed.
2. Tap each setting and adjust
settings with sliders by sliding
decrease and
right to increase.

Vizio E50-D1 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	49.5 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Supported video modes	1080p
Contrast ratio (dynamic)	5000000:1
Display number of colors	16.78 million colors
Motion interpolation technology	-
Processor cores	6
Ambient light sensor	Yes
HDMI version	1.4
PC in (D-Sub)	No
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
On Screen Display (OSD) languages	ENG, ESP, FRE
Battery type	AAA
Number of batteries supported	2
RMS rated power	20 W
Sustainability certificates	ENERGY STAR
Power consumption (standby)	0.5 W
Power consumption (typical)	49.7 W
Product color	Black
Panel mounting interface	200 x 200 mm
Remote control type	XRT133
Package depth	161.04 mm
Package width	1233.93 mm
Package height	759.97 mm
Package weight	16197 g

Weight and Dimensions

Depth (with stand)	255.02 mm
Width (with stand)	1127.76 mm
Height (with stand)	710.44 mm
Weight (with stand)	12400 g
Depth (without stand)	75.95 mm
Height (without stand)	650.5 mm
Weight (without stand)	12100 g