Vizio E55-C1 - Page 34

4
34
To show or hide the Color Bar Test Pattern:
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons
to highlight Color Tuner, and then press the Left/Right Arrow
buttons until the SMPTE Test Pattern menu is displayed.
SMPTE Test Pattern
Off
2. Use the Arrow buttons on the remote to highlight 2΍. Use the
Left/Right Arrow buttons to highlight On to show the Color
Bar.
—or—
To hide the Color Bar Test Pattern, use the Left/Right Arrow
buttons to highlight 2΍.
3. :KHQ\RXDUHȴQLVKHGpress the BACK button to adjust
additional settings or EXIT.
To show or hide the Flat Test Pattern:
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons
to highlight Color Tuner, and then press the Left/Right Arrow
buttons until the Flat Test Pattern menu is displayed.
Flat Test Pattern
Off
2. Use the Arrow buttons on the remote to highlight 2΍. Use the
Left/Right Arrow buttons to select the percentage brightness
IRUWKHȵDWWHVWSDWWHUQSelecting a percentage immediately
VKRZVWKHȵDWSDWWHUQDWWKDWbrightness.
—or—
To disable the Flat Test Pattern, use the Left/Right Arrow
buttons to highlight 2΍.
3. :KHQ\RXDUHȴQLVKHGpress the BACK button to adjust
additional settings or EXIT.