4
53
Blocking and Unblocking Content by Rating
A channel may sometimes broadcast programs that are meant for
children, and at other times broadcast programs that are meant
for mature audiences. You may not want to block the channel
completely using a channel lock, but you may wish to block certain
programs from being viewed.
When this is the case, you can use the TV’s Rating Block feature to
block content based on its rating.
)RUDOLVWRIFRQWHQWUDWLQJVDQGWKHLUGHȴQLWLRQVYLVLW
www.tvguidelines.org.
To block or unblock content by its rating:
1. From the PARENTAL CONTROLS menu, highlight the content
type you want to adjust and press OK:
USA - TV - USA television program broadcasts.
USA - Movie - USA movie broadcasts.
CAN - English - Canadian English television program
broadcasts.
CAN - French - Canadian French television program
broadcasts.
2. For each rating type you want to block or unblock, use the Up/
Down and Left/Right Arrow buttons on the remote to highlight
the rating type and press OK.
3. When the rating type is blocked, the Lock icon appears locked.
Content with this rating and all higher ratings cannot be
viewed.
4. When the rating type is unblocked, the Lock icon appears
unlocked. Content with this rating and all lower ratings can be
viewed.
If you want to block all unrated content, highlight Block
Unrated Shows and use the Arrow buttons on the remote to
select On.
5. :KHQ\RXDUHȴQLVKHGDGMXVWLQJWKHUDWLQJOHYHOEORFNVSUHVV
the EXIT button on the remote.
Changing the Parental Control Passcode
If you use the parental controls, you should change the passcode to
prevent children from accessing inappropriate material.
To change the parental control passcode:
1. From the PARENTAL CONTROLS menu, highlight Change PIN
and press OK. The CHANGE PIN menu is displayed.
2. In the New PINȴHOGXVHWKHNumber Pad on the remote to
enter your new 4-digit parental control passcode.
3. In the &RQȴUP3Ζ1ȴHOGXVHWKHNumber Pad on the remote
to re-enter your new 4-digit parental control passcode.
4. Write down your new parental control passcode and save it in
a secure location.
5. Press the EXIT button on the remote.
Resetting the Content Locks
To reset the content locks to the factory-default settings:
1. From the PARENTAL CONTROLS menu, highlight RESET LOCKS
and press OK. The TV displays, “Are you sure you want to
RESET ALL LOCKS SETTINGS to the factory defaults?”
2. Highlight Yes and press OK.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
