5
25
$GMXVWLQJWKH0RUH3LFWXUH6HWWLQJV
To adjust the More Picture settings:
1. From the PICTURE menu, use the
Arrow buttons on the remote to
highlight 0RUH3LFWXUH and press
OK. The MORE PICTURE menu is
displayed.
2. Use the Arrow buttons to highlight
the setting you wish to adjust, then
press /HIW5LJKW$UURZbuttons to
change
the setting:
• Color Temperature -
See
Adjusting the Color
Temperature
on page 26.
• %ODFN'HWDLO- Adjusts the
average brightness of the
picture to compensate for
large areas of brightness.
Select 2, Low, 0HGLXP, or
+LJK.
• $FWLYH/('=RQHV -
Dynamically improves the
contrast ratio of the picture
by adjusting the backlight.
The adjustment is controlled
by the content on the screen.
Select On or 2.
• &OHDU$FWLRQ - Reduces blur in scenes with fast action. Some
VHQVLWLYHYLHZHUVPD\QRWLFHȵLFNHU6HOHFWOn or 2.
• 5HGXFH1RLVH - Opens a sub-menu with two settings:
• 5HGXFH6LJQDO1RLVH-
Reduces background picture noise
when viewing analog sources. The function helps to correct
"speckle" noise with a slight reduction in sharpness.
Select
2, Low, 0HGLXP, or +LJK.
VIZIO
MORE PICTURE
Color Temperature Cool
Black Detail Low
Active LED Zones On
Clear Action On
Reduce Noise
Game Low Latency Off
Picture Size & Position
Film Mode Auto
Gamma 2.2
• 5HGXFH%ORFN1RLVH - Reduces pixelation and distortion
IRUPSHJȴOHV6HOHFW2, Low, 0HGLXP, or +LJK.
• Game Low Latency - Reduces video delay (lag) when
gaming. Select On or 2. This option is not available for
devices connected using a coaxial cable.
• 3LFWXUH6L]H3RVLWLRQ - Opens a sub-menu with two
settings:
• 3LFWXUH6L]H increases or decreases the vertical and
horizontal size of the displayed picture.
• 3LFWXUH3RVLWLRQ adjusts the vertical and horizontal
positions of the picture to ensure the image is centered
DQGFRPSOHWHO\ȴOOVWKHVFUHHQ8VHWKH/HIW5LJKW$UURZ
buttons to adjust the horizontal position of the displayed
picture. Use the Up/Down Arrow buttons to adjust the
vertical position of the displayed picture. Press the OK
EXWWRQZKHQ\RXDUHȴQLVKHG
• )LOP0RGH2SWLPL]HVWKHSLFWXUHIRUZDWFKLQJȴOP6HOHFW
$XWRRU2
• Gamma - Sets the shape of the gamma curve. Use lower
values for bright room conditions and higher values when it
is dark. Select 1.8, 2.0, 2.1, 2.2, or 2.4.
3. :KHQ\RXKDYHȴQLVKHGDGMXVWLQJWKH0RUH3LFWXUH6HWWLQJVSUHVV
the EXIT button on the remote.