Vizio M Series User Manual

38
CRegulatory Information
FCC Class B Radio Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
Changes or modifications not expressly approved by the party responsible for
compliance with the FCC Rules could void the user’s authority to operate this
equipment.
Notice
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Shielded interface cables and AC power cord, if any, must be used in order to comply
with the emission limits.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modification to this equipment. It is the responsibilities of the user to
correct such interference.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operations in the 5GHz products are restricted to indoor usage only.
This equipment complies with FCC/ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Caution
Always use a power outlet that is properly grounded
Canada Notice for License-Exempt Radio Apparatus
This device complies with IInnovation, Science and Economic Development Canada’s
license-exempt RSSs. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This device operates on a no-protection no-interference basis. Should the user seek
to obtain protection from other radio services operating in the same TV bands, a
radio license is required. Please consult Innovation, Science and Economic Development
Canada’s document CPC-2-1-28, Optional Licensing for Low-Power Radio Apparatus
in the TV Bands, for details.
Cet appareil est conforme aux CNR exempts de licence d'Innovation, Science et
développement économique Canada . Son fonctionnement est sujet aux deux
conditions suivantes:
1. le dispositif ne doit pas produire de brouillage préjudiciable, et
2. ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable
Cet appareil fonctionne sur une base sans protection et sans interférence. Dans
le cas où l’utilisateur cherche à obtenir de la protection des autres services de
radio fonctionnant sur les mêmes bandes TV, aucune license est requise. Veuillez
consulter le document CPC-2-1-28 d’Industrie Canada, License optionnelle pour les
appareils radio de faible puissance, pour plus de détails.
Industry Canada Class B emission compliance statement
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada.

Vizio M Series Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	70 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Display number of colors	1.073 billion colors
Viewing angle, horizontal	176 °
Supported graphics resolutions	3840 x 2160
Motion interpolation technology	Clear Action 240
3D	No
Battery type	AAA
Hybrid Log-Gamma (HLG)	Yes
Number of batteries supported	2
Processor cores	8
Video compression formats	H.265, VP9
Product color	Black
Panel mounting interface	400 x 400 mm
Operating system installed	SmartCast OS
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Composite video in	0
HDMI ports quantity	4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
Tuner type	Analog & digital
Analog signal format system	-
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
RMS rated power	10 W
Power consumption (standby)	0.5 W
Power consumption (typical)	173 W
Screw thread	M6
Package depth	184.9 mm
Package width	1680 mm
Package height	1019 mm
Package weight	35800 g
Cables included	AC
Remote control type	XRT136

Weight and Dimensions

Depth (with stand)	310.4 mm
Width (with stand)	1553.2 mm
Height (with stand)	967.7 mm
Weight (with stand)	26530 g
Depth (without stand)	60.7 mm
Height (without stand)	897.9 mm
Weight (without stand)	26140 g