VIZIO VF550M User Manual
Version 3/4/2009 19
www.VIZIO.com
CD DVD
CD DVD
Connecting Your DVD Player
You have several options for connecting your DVD player to your HDTV: HDMI, Component, S-Video and
Composite (AV) inputs. Based on your home theater configuration, you can decide which option is the
right one for you.
Using HDMI (Best)
For optimal results, DVD players that have a digital interface such as HDMI should be connected to the
HDMI input on your HDTV.
1. Turn off your HDTV and DVD player.
2. Connect a HDMI cable to the HDMI output of your DVD player and the other end to the HDMI
2 input at the rear of the HDTV.
3. Turn on the power to the HDTV and your DVD player.
4. Select HDMI 2 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the HDMI button on the Remote Control.
Note: If HDMI 2 is being used, connect to another HDMI port instead.
HDMI Connections for DVD Players with DVI
1. Turn off your HDTV and DVD player.
2. Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the
HDMI 4 Input at the rear of the HDTV.
3. Connect the audio cables (white and red) from the DVI audio output jacks on the DVD player to
the adjacent HDMI 4 L and R AUDIO jacks on the back of your HDTV.
4. Turn on the power to the HDTV and your DVD player.
5. Select HDMI 4 using the INPUT button on the remote or side of the HDTV, or directly by pressing
the HDMI button on the Remote Control.
Note: To maintain the display quality, use a VIZIO certified HDMI cable. Cable lengths up to 10 meters
are available. See www.VIZIO.com or call 1-888-VIZIOCE (1-888-849-4623) for details.
To Next Page
Loading...
Need help?
General
