VIZIO VOJ320F1A User Manual
Version 8/25/2008 23
www.VIZIO.com
For DVD Players with DVI:
1. Turn off the HDTV and DVD player.
2. Using a HDMI-DVI cable, connect the DVI end to your
DVD player and the HDMI2 end to the HDMI Input (white
color area) at the rear of the HDTV.
3. Connect an audio cable (white and red connectors) to the
audio output connectors associated with the DVI output of
the DVD player and connect the other end to the audio
connectors by the HDMI input (white area) at the rear of the HDTV.
4. Turn on the power to the HDTV and your DVD player.
5. Select HDMI 2 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the HDMI button on the Remote.
Note: Refer to your DVD player user manual for more information about the video output
requirements of the product.
To Next Page
Loading...
Need help?
General
