Vizio VS42LF - Picture-In-Picture(Pip) Mode; Adjusting Basic PIP Settings

VIZIO VS42L FHDTV10A User Manual
Version 2/11/2008 53
www.VIZIO.com
4.18.1
4.18.14.18.1
4.18.1 Picture
PicturePicture
Picture-
--
-In
InIn
In-
--
-Picture
PicturePicture
Picture(PIP)
(PIP) (PIP)
(PIP) Mode
ModeMode
Mode
Your TV features PIP mode so you can watch two pictures at the same time. When PIP is turned on, you
can display two pictures at one time. One picture is displayed as the full screen (main screen) and the
other picture is displayed in a small window (sub screen). The sub-screen can be set to small, medium or
large.
See below for detailed information regarding the PIP sources.
SUB
MAIN
DTV / TV AV Component RGB HDMI
DTV / TV   
AV   
Component   
RGB   
HDMI    
“” – Indicates which inputs are available for PIP mode.
4.18.2
4.18.24.18.2
4.18.2 Adjusting Basic PI
Adjusting Basic PIAdjusting Basic PI
Adjusting Basic PIP Settings
P SettingsP Settings
P Settings
The PIP channel is independent of the main TV channel.
To change the PIP channel, press the PIP CH + or - button
on the remote control.
Repeated pressing of the PIP button will turn on, turn off the
PIP mode.
Repeated pressing of the PIP
INPUT button will cycle through
the inputs for PIP. This button
has no effect when PIP is off.
Press the PIP SIZE button to alternate between Small,
Medium and Large PIP sizes.
You can swap the program that is in the main picture with the program in the PIP sub-picture. To swap
the main picture program with the PIP sub-picture program, press SWAP on the remote control. If you
press SWAP again, it will return the program to the main picture.