VlZlOVX32LHDTVUserManual
4.m.9 Rdvanced Video
Press the _ button to highlight the option for
Advanced Video selection and press the OK
button. A new menu will be displayed showing the
advanced functions available for fine tuning of the
picture.
DNR
Press the _ button to highlight DNR (Dynamic
Noise Reduction). Use this feature to diminish
picture artifacts caused by the digitizing of image
motion content that may be present in the picture.
Press the D or _ button to choose from the Off,
Low, Medium or Strong setting.
Black Level Extender
Press the _ button to highlight Black Level Extender. Use this feature to increase the picture
reproduction performance in the dark areas of the picture. Press the D or _ button to turn this feature
On or Off.
White Peak Limiter
Press the _ button to highlight White Peak Limiter. Use this feature to limit excessive white in bright
areas of the picture, caused by a lower sync level for a channel being received from the antenna or cable.
Press the D or _ button to turn this feature On or Off.
CTI
Press the _button to highlight CTI (Color Transient Improvement). This feature can be used to reduce
the time taken to transition from one color to another. The effect will be seen as sharpening the border
between colors. Press the D or _ button to choose from the Off, Low, Medium or Strong setting.
Flesh Tone
Press the _ button to highlight Flesh Tone. In some cases, activation of this feature can result in a
more pleasing production of sky and flesh color. Press the D or _ button to turn this feature On or Off.
Adaptive Luma
Press the _ button to highlight Adaptive Luma. Large areas of darkness in a picture will result in a
lower Average Picture Level (APL) and the overall picture will look too dark; activation of this feature will
raise the APL to counteract this effect. Press the _ or _ button to turn this feature On or Off.
Version 10/4/2006 33
www.VIZIOCE.com
To Next Page
Loading...
Need help?
Display
Connectivity
Weight and Dimensions
