VlZlOVX32LHDTVUserManual
InstaLLation Preparation
Please read this user manual carefully before installing your VlZtO HDTV.
The power consumption of the TV is about 180W, please use the power cord designated for TV. When
an extension cord is required, use one with the correct power rating. The cord must be grounded and the
grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space
between the back of the TV and the wall. tf you would like to mount your TV on the wall, please see
below 'Preparing Your LCD HDTV for Wall Mounting' for additional information. Avoid installing the TV in
places with high humidity, dust or smoke so as not to shorten the service life of the electronic components.
Install the TV in landscape orientation; any 90 ° clockwise or counter-clockwise installation may induce
poor ventilation and excessive component damage.
VlZlO offers professional installation services. Please contact VlZtO for more information on these
services at 888-VlZlOCE (888-849-4623) or www.vizioce.com.
Preparinq Your LCD HDTW WaLL Mountinq
The VlZlO VX32L can either be kept on the stand base or mounted on the wall for viewing. If you choose
to mount the VX32L on the wall, please follow the instructions below for removing the stand base.
To remove the sband base
1. Unplug all of the cables and cords
from your VX32L.
2. Place the VX32L face down on a soft
and flat surface (blanket, foam, cloth,
etc) to prevent any damage to the TV.
3. Remove the eight (8) screws holding
the base to the VX32L.
4. Carefully remove the stand base.
To find the perfect mount for the VlZlO VX32L,
browse VlZlO's certified mount selection at
www.vizioce.com or call directly 888-VlZtOCE
(888-849-4623).
Version 10/4/2006 5
www.VlZlOCE.com
To Next Page
Loading...
Need help?
Display
Connectivity
Weight and Dimensions
