VIZIO VX37L HDTV10A User Manual
Version 1/25/2007 38
www.VIZIO.com
4.6 DTV / TV Input Parental Control
4.6.1 Channel Block
If you want to restrict certain channel and program viewing, you can do this by turning on the Parental
Control. Selected programs, movies and channels can then be made available only after an authorized
password has been entered and accepted by the TV.
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE
adjustment page. Press the button to display
the PARENTAL page.
The Password must be entered before the TV will
continue with Parental settings. The default
password set in the factory is 0 0 0 0. If you are
going to use the Parental Control feature you
should change the password.
Press the button to highlight the Channel
Block selection.
Press the button to turn it on or off.
Note: Make sure you write down and store the new password in a secure place.
The Reset All Settings feature (see page 37) does NOT reset the password.
To Next Page
Loading...
Need help?
General
