·Replace the engine oil when maintenance period reached.
·Replace the oil when engine is hot to totally drain off the old oil.
·The replacement for oil：
–Keep the motorcycle upright by standing rack.
–Turn the cap of oil filling-up port anticlockwise.
–Lay an oil tray under oil drainage bolt, then remove the bolt by tools and
drain off the old oil.
Fasten the oil drainage bolt before filling up with new oil.
Replace the oil drainage bolt and its seal ring for a new one when re-assembling, in case still use the old one, it is easy
to make oil leakage.
Drain off the oil when the engine is hot makes total drainage, but the hot oil and muffler may get user hurt, so before the
drainage, wait for the bolt and muffler basically cooled down.
!
Warning
Seal washer
47
Replacement for engine oil
!
Danger
To Next Page
Loading...
