WBV.PU.002.EN VX186QD V2.0
8.6 Greasing of sealing prechamber
Grease nipples Fig. "Gear oil change"
Grease nipples are primarily used for long-fibred media. They can be retrofitted upon request.
The sealing prechamber can be lubricated via the grease nipples. Lubrication prevents the fibrous matter
from hardening and impairing the function of the mechanical seal.
• A regular lubrication interval prevents the lubrication channel from clogging.
• To ensure effective distribution of the lubricant, always lubricate while the machine is running and not
when it is stationary.
Lubricating grease - type
We recommend the lubricating grease listed in Chapter "Oils and lubricants".
Lubricating grease - quantity
• Grease nipples (4 x) at gearbox side: 5 shots per grease nipple with a lube gun
• Grease nipples (2 x) on QD cover: 6 shots per grease nipple with a lube gun
Lubrication interval
• Before and after long shutdowns (2-3 weeks)
Chap. "Maintenance plan"
To Next Page
Loading...
