Void KRYO K8 - Technical Specifications; Performance and Electrical Data; Power Output, Dimensions, and Weight

Page 12
Kryo Series Power Amplifiers
acoustics
TECHNICAL SPECIFICATIONS
Dimensions :
48.3 cm (19") wide, 8.9 cm (3.5") high and 46.0 cm (18.1") deep.
Weight:
Kryo K8: 14.0 Kg (30.4 pounds) net.
15.0 Kg (32.6 pounds) shipping weight.
Kryo K8
S/N 20Hz-20kHz, ref full output
+/- 15 deg
INTERMODULATION DISTORTION, SMPTE
FREQUENCY RESPONSE ref.100W@8Ω
20Hz - 20kHz +/-0.25 dB
THD ref. 4Ω, 20Hz - 20KHz
220 - 240V AC 50/60 Hz
VOLTAGE RANGE
AMPLIFIER PROTECTION
<0.05%
CROSSTALK 20Hz - 20KHz
SLEW RATE
VOLTAGE GAIN
PHASE RESPONSE @ 1 watt 20Hz - 20KHz
DAMPING FACTOR 20Hz - 1KHz @ 8Ω
CONNECTORS
COOLING
65V/us
Input: balanced XLR Output: Speakon + Binding Posts
2 Variable speed fans
Full short circuit, open circuit, thermal, ultrasonic, and
RF protection, stable into reactive or mismatched loads
<0.05%
>75dB
26/32/38 dB
>800
107 dB
4
8
2
8
1kHz
Pink Noise
3450
4600
2300 2700
1300
6900
0.1%THD+N 12dB Crest Factor
Kryo K8
Mode
Both
Channels
Driven
Bridge Mode
Impedance
RMS Output Power per ch
Maximum Current Draw
@ 1/8 rated power
13 A
Sensitivity @ 4 Ω
5.1/2.6/1.3 V
4
4600