VOLTCRAFT SL-300 - Page 7

7
Press the button
continuously before power it
onthen press
it will be displayed as
following
Press‘LEVEL’button to adjust memory timepress
‘HOLD’ button to hold the setup
3.2 Data zero function
Press the button continuously before power it
onloosen the
button when the display showing‘CLR’ after the
meter
power onwhich indicates that the data in
DATALOGGER has been deleted.
SETUP button
40The time chip adjustment
Press‘SETUP’button and then power it
onwhen‘TIME’symbol displays then
loosen‘SETUP’the meter will be under time
adjustment modeat the time the display will
show the date as following