16
9. accessories:
installation CD
USB interface cable
screwdriver
tripod
windscreen
DC 9V power supply.
10. Installing the software
1.0 Start windows
1.1 Insert the CD into the CD-drive.
1.2 Run SETUP.EXE installation
program in file DISK1, install it to the
referred directory
1.3 install CP2102 drive software
Connecting the meter with the computer
by USB interface, install CP2102 drive
software in my computer
property:\hardware\facility management\
COM CP210X USB.
USB Drive Installation
1. Copy the CP2101WIN Drivers to a certain directory,
usb_driver.
2. Connect the USB to the computer, the Windows
system will show finding a new hardware.
Choose specific directory C:\ usb_driver
according to the instruction.
To Next Page
Loading...
