Fault message
is displayed on the screen when the system dis-
covers a fault.
All fault messages must be acknowledged. Acknowl-
edge by pressing the button; if the fault is accompanied
by an audible signal, the signal will silenced. Go to the
information panel to get information regarding the
alarm.
For further information on how to handle fault mes-
sages and recommended actions, refer to the Fault
Handling page 55 and Fault Code Register chapters.
Instruments and Controls
47702599 12-2011 15
47702599 - Downloaded from www.volvopenta.com 23/11/2015 22:01:35
To Next Page
Loading...
