Engine
Information concerning
the engine and its transmission
is displayed in this view.
Depending on the functions installed in the boat, the
following can be displayed:
- Engine Speed
- Power Trim angle, for further information refer to
Trim Controls and PTA calibration in the Settings
Menu page 114 chapter.
- Rudder angle
- Coolant Temperature
- Voltage, battery voltage
- Engine oil pressure
- Turbo pressure
- Engine hours, total operating hours.
The information in this view cannot be changed.
Instruments and Controls
26 47702599 12-2011
47702599 - Downloaded from www.volvopenta.com 23/11/2015 22:01:35
To Next Page
Loading...
