Docking
When the docking function is activated, engine revo-
lutions are
limited and the boat can only be steered by
the joystick.
In order to activate the docking function, the following
must be fulfilled:
•
engines running
•
control levers in neutral
•
helm station active
•
joystick in center position
Activating the docking function
Activate docking mode by depressing the docking but-
ton (A) on the joystick.
An audible signal will confirm that docking mode is
activated and the docking button lamp will light up.
Exiting the docking function
To exit the function, press the joystick docking button
(A). An audible signal will sound twice to confirm that
docking mode is deactivated, and the docking light will
go out.
The docking function is also deactivated if the controls
are moved from the neutral position.
Instruments and Controls
47702095 04-2011 35
To Next Page
Loading...
