EasyManua.ls Logo

Volvo Penta PENTA - Pre-Launch Inspection and Preparation; Pre-Launch Procedures

Volvo Penta PENTA
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pre-launch
Check the oil levels m the engine and reverse
gear
Check that all water drainage plugs and all hos-
es have been reinstalled Dram anti-freeze from
sea water system DO NOT DRAIN ANTI -
FREEZE INTO THE ENVIRONMENT D~spose of
ant~-freeze properly
Check the tightness of the hose clamps at the
same brae as the conditton of the rubber hoses
and bellows is checked
CBean the backfire - flame arrestor,
Paint the bottom of the hull (see page 19)
Check that the batteries are fully charged Install
battenes with the ~gnttlon ~n the "OFF" posttEon
Make sure terminals are secure and spray with
Dura Plus
TM
Corroston Shield
Fill up the fuel tanks. Open fuel valves if they
have been closed
Fit the propeller (-s) ~f it has been removed
Launch the boat. Run engme room blower for
four minutes Start engine and check at[ functions
and all fluids for leaks
VOLVO PENTA Dura Plus
TM
Brand Products
Synthetic Motor Oil, SAE 30
Heavy Duty CE / SG
t2 4
Quarts Gallons
3851230-7 3851232-3
Corrosion Shield .................................................. 362002-8
Extended L}fe Coolant ................................................. 381081-9
Spray Paint
Dark Charcoal, Engine ................................................... 3851221-6
Genume Volvo Penta Parts are the result of many hours of strenuous testing and fulfill Volvo Penta’s
strict quality and safety requJrments Your Volvo Penta dealer has a complete hne of Genuine Volvo
Penta parts, coolants and lubricants When replacement parts are required, use only Genuine Volvo
Penta parts
24
7788827 - Ladattu osoitteesta www.volvopenta.com 17.11.2010 12:21:31

Other manuals for Volvo Penta PENTA

Related product manuals