EasyManua.ls Logo

Volvo Penta TAMD60B User Manual

Volvo Penta TAMD60B
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTRUCTION BOOK
TAMD60A/B, TAMD70C/D, AQD70C/D
Question and Answer IconNeed help?

Do you have a question about the Volvo Penta TAMD60B and is the answer not in the manual?

Volvo Penta TAMD60B Specifications

General IconGeneral
BrandVolvo Penta
ModelTAMD60B
CategoryEngine
LanguageEnglish

Summary

Engine Presentation

Type Designations

Details on model names, engine types, and number plate locations.

Engine Component Identification

Visual identification of key components for TAMD60 and AQD70 engine models.

Running and Controls

Instruments and Controls

Explanation of engine instruments, gauges, and control lever functions.

Pre-Start Procedures

Steps before starting the engine, including checking levels and systems.

Starting and Running Procedures

Instructions for starting the engine, managing speed, and during-run checks.

Stopping and Safeguards

Procedures for stopping the engine, get-you-home device, and frost precautions.

Lubricating Oil and Fuel

Engine Lubricating Oil

Requirements, quality, viscosity, and recommendations for engine oil.

Reverse Gear and Hydraulic Oil

Lubricating oil specifications for reverse gears and hydraulic systems.

Fuel Specifications and Handling

Diesel fuel quality demands, sulfur content, and handling recommendations.

Fuel Filters and Venting

Checking, cleaning, and replacing fuel filters, plus fuel system venting procedures.

Electrical System

Electrical System Overview

General information on the electrical system, including alternator and battery handling.

Wiring Diagrams

Schematic diagrams illustrating the engine's electrical connections and components.

Servicing

Daily Maintenance Checks

Routine checks performed daily on engine oil, reverse gear, coolant, and batteries.

Periodic Servicing Intervals

Maintenance tasks scheduled for 50, 100, 200, 600, 1200, and 2400-hour intervals.

Specific Maintenance Tasks

Detailed procedures for cleaning air cleaners, checking injectors, cooling systems, and starter motors.

Engine Protection and Storage

Procedures for inhibiting (protecting) and de-inhibiting (preparing for use) the engine.

Technical Data

Engine Specifications

Detailed technical data for engine types, including bore, stroke, displacement, and speeds.

Cooling and Hydraulic Systems Data

Specifications for cooling system capacity, thermostat operation, and hydraulic oil.

Turbo-compressor and Reverse Gear Specifications

Technical data for turbo-compressors and various reverse gear models.

Related product manuals