EasyManua.ls Logo

Volvo Penta TAMD73P - Page 41

Volvo Penta TAMD73P
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18. Check/clean seawater
filter.
Note. The time must be judged by experi-
ence after running the engine for a while.
19. Check batteries.
20. Top up anti-corrosive
agent in freshwater
system.
21. Clean cooling system.
Change coolant.
* Note! At least once every other year.
22. Check/clean heat ex-
changer, charge air cool-
er (CAC), and reverse
gear oil cooler.
23. Check/replace pump im-
peller in seawater pump
and extra bilge pump (if
installed).
123456789012345678901
123456789012345678901
123456789012345678901
123456789012345678901
123456789012345678901
50 Hrs
250 Hrs
500 Hrs
1000 Hrs
2000 Hrs
12 months
Close the sea cock. Remove cover (1) and lift up insert. Clean insert and hous-
ing (2). Reinstall components. Open the sea cock and check for leaks.
60
72
96
32,
59
32,
60
32,
64
Use protective goggles! Battery fluid approx. 10 mm (0.39") over cell plates.
Warning! The batteries contain oxyhydrogen gas and extremely corrosive
sulfuric acid. Naked flames/sparks close to batteries may cause an explo-
sion.
Add 1/2 liter anti-corrosion agent to the freshwater system (P/N 1141526-2).
NOTE! Only when glycol is not used in the cooling system.
Close sea cock and drain the water from the seawater and freshwater systems.
Flush via holes for drain cocks and plugs until clean water runs out.
Close sea cock and drain the water from the seawater and freshwater systems.
See also instructions on pages 6063.
Close the sea cock and drain the water from the seawater system. See also
instructions on page 64.
No. Operation Instructions Info.
pge.
*
7740156 - Downloaded from www.volvopenta.com 22/07/2009 00:44:08

Related product manuals